|
|
| |
|
|
|
|

|

|
Click to enlarge image
|
Model Number |
Aum-2KN23F |
Electronic Cooling Controller : Range -50.0~100.0°C
- The linkage function is an option for this model.
- Operating Range : -50.0~100℃
- Input sensor : NTC 5.0 Kohm (2 sensors)
- Output : Relay On/Off
Output 1. Temperature control(5A) Output 2. Defrost(5A) Output 3. Fan(5A)
Main features
- Temperature differential function that protects a machine from frequent stops and restarts and the chattering due to electric noise( 0.0~±12.7℃)
- Temperature calibration function (0.0 ~±6.3℃)
- Time delay function for the operation of relays (Maximum 15minutes)
- High/Low limit alarm setting function
- Defrost function according to time or temperature
- Defrost method selection function (Heater/Hot Gas)
- Drain time setting function
- Delay function for fan output relay (Maximum 15minutes)
- Fan mode setting function
- Celsius / Fahrenheit display function
- Simultaneous defrost start and finish of all temperature controllers by connecting controllers
- 2 steps program lock function
- RS-485 communication(Option)
Technical Data
|
Housing
|
plastic resin ABS extinguishing grade V0. |
|
Dimension
|
front 80x38m, depth 77mm |
|
Mounting
|
flush panel mount with mounting bracket, Panel cut-out 70.5x30mm. |
|
Protection
|
the instrument front panel is waterproof IP52 |
|
Connections
|
screw terminal block. (2.5mm2, one wire each terminal only, in compliance with VDE norms. |
|
Display
|
4 digits with "-" sign; 12.5mm LED |
|
Push buttons
|
Located on front panel. |
|
Data storage
|
fresh ROM memory |
|
Operating temperature
|
0~60°C |
|
Storage temperature
|
-20~60°C |
|
Input
|
two NTC probe. |
|
Output
|
one temp. control relay 5A 250V AC. one defrost relay 5A 250V AC. one Fan delay relay 5A 250V AC. |
|
Resolution
|
0.1°C |
|
Accuracy
|
better than 0.5% of full scale. |
|
Power supply
|
12VAC/DC, 24Vdc |
|
|
|
|
| |
|
|
|